SK210 JS200 JS210 JS240 JS330 PC200 PC300 DX300L Excavator Demolition crusher For 20-40 Tons Excavator
Suitable for demolition and crushing of all concrete and brick structures. With special steel blade at the root,
it is conducive to shear and recovery of reinforcement. Widely used in municipal construction, demolition and other fields.
1. The adoption of special slewing support provides stable perfomance.
2. The shear uses imported steel material,with double-layer wear -resisting protection,high strength amd long service life.
3. The strcution is optimized by design and hai large shear.
The cutting mouth adopts imported material, with wear-resisting welding wire, and the pattern design is more wear-resisting and beautiful.
The body adopts Q355B manganese plate design with high strength, light weight and good wear resistance.
Two times of paint, thickness 40-50min fine paint surface, rust proof.
The cylinder is thickened and lengthened for greater shear force.
CNC head boring process with high accuracy, high concentricity, more durable.
Its unique design and innovative way to ensure efficient operation and strong cutting force, powerful cylinder to strengthen the mouth closing force to shear hard concrete.
Suitable for demolition of all buildings, concrete crushing, root with steel sheet, conducive to steel shear, recycling.
1. Check the tightening state of bolts and install new bolts. Check and ensure that the bolts tightened are not loose after 8 hours of use. The damaged bolts should be replaced in time. Bolts should be replaced after approximately 1500 hours or 12 months of use after installation.
2, in the process of use, it is recommended to check regularly whether there is oil leakage to ensure no fault, so as not to affect the normal use.
Every 4 hours : add lubricateing oil, shaft pin and rotating gear 1 time.
Every half a year or 1000 hours (whichever comes first): replace the hydraulic cylinder oil seal and motor oil seal once. If the oil seal is not replaced within the specified period, there is a certain probability that other parts of the product will be damaged, for example, the cylinder will be strained.
Product Parameters
| SCRAP STEEL |
| Model | Unit | DPAC1600 | DPAC2000 | DPAC2300 | DPAC4500 |
| Dead-weight | kg | 1413 | 2200 | 2977 | 4052 |
| Max Opening | mm | 540 | 500 | 660 | 801 |
| Height | mm | 2050 | 2380 | 2600 | 2700 |
| Width | mm | 1175 | 1370 | 1600 | 1700 |
| The Active Length of Blade | mm | 348 | 486 | 578 | 736 |
| Rotation Mode | | Ball | 360°Hydraulic |
| Pressure | bar | 300 | 320 | 320 | 320 |
| Root Crushing Force | ton | 138*2 | 171*2 | 330*2 | 387*2 |
| Middle Crushing Force | ton | 80*2 | 102*2 | 189*2 | 218*2 |
| Fore-end Crushing Force | ton | 53*2 | 75*2 | 127*2 | 147*2 |
| Suitable Excavator | ton | 15-18 | 20-25 | 28-35 | 38-50 |
| CONCRETE |
| Model | Unit | DPAC1600C | DPAC2000C | DPAC2300C | DPAC4500C |
| Dead-weight | kg | 1345 | 2164 | 3060 | 4052 |
| MaxOpening | mm | 650 | 950 | 1100 | 1200 |
| Height | mm | 1888 | 2374 | 2480 | 2700 |
| Width | mm | 1175 | 1360 | 1540 | 1700 |
| The ActiveLength of Blade | mm | | | | |
| Rotation Mode | | Ball | 360°Hydraulic |
| Pressure | bar | 300 | 320 | 320 | 320 |
| RootCrushing Force | ton | 120*2 | 168*2 | 288*2 | 375*2 |
| Middle Crushing Force | ton | 66*2 | 78*2 | 125*2 | 174*2 |
| Fore end Crushing Force | ton | 40*2 | 56*2 | 90*2 | 118*2 |
| Suitable Excavator | ton | 15-18 | 20-25 | 28-35 | 38-50 |
Product Tags:
|
|
Excavator Demolition Crusher SK210 JS200 JS210 JS240 JS330 PC200 PC300 DX300L Images
|
